Portable level two maintenance acceptance equipment
Portable level two maintenance acceptance equipment
The following devices can be freely combined according to the actual needs of the user
First, portable brake test Bench
LZD-C type microcomputer handheld braking performance tester is a microcomputer as the core of intelligent instruments, mainly used in automotive braking performance testing. The host is composed of single chip microcomputer, built-in sensor, printer, keyboard, LCD display, with data storage, display, printing and other functions, LZD-C type microcomputer handheld braking performance tester has simple operation, easy to carry, flexible and easy to use and so on.
General parameters:
Power supply: Nickel cadmium battery 7.5V;
Charging power supply: AC220V 50Hz;
Technical parameters
①, braking time: Measuring range: 0.00~10.00 s Error: 0.5%
②, brake reduction Speed: Measuring range: 0.00~9.80M/S2 error: ±0.1 m/s2
③, braking distance: Measuring range: -9.8~99.99 m Error: 5%±0.10m
Second, the car headlight detector
Main technical parameters:
1, the scope of use:
Temperature: -20℃~55℃
Relative Humidity: 20%~80%
Environment: Indoor (or outdoor sun-avoiding and shelter from the rain)
2. Measuring range:
Luminescent Strength: 0~40000CD
Optical axis Skew Amount:
Vertical direction: Upper 1°20 ' ~ Lower 2°20 '
Horizontal direction: Left 2°20 ' ~ Right 2°20 '
3, the error of the display value:
Luminescent strength: ±10% (relative error) Optical axis offset: ±15 '
4, Headlight Center High measurement range: 0.5~1.25m
5, detection distance: 1m
6, Dimensions: (mm) (length * width * height)
Host: 850*600*60
Lifting bracket: 720*660*110
Third, single skateboard side slip test Bench
Main technical parameters and performance:
Maximum Axial weight: 6T
Dimensions: 1270*500*45 (mm)
Motherboard size: 500*500*45 (mm)
Skateboard Stroke: inward 5mm, outward 5mm
Measuring range: Inward 0-9m/km; outward 0-9 m/km
Display mode: pointer display
0 Point change: ±0.2m/km
Resolution: 0.1M/KM
Display Error: ±0.2m/km
Judgment error: ±0.2 m/km
Skateboard Shift Power: 30N when the skateboard moves 0.1mm
70N when the skateboard moves 2.5mm
Iv. Automotive Emission Gas Analyzer
Technical parameters
1. the measuring range: 0---25﹪
2, measurement accuracy: ±1﹪
3, working environment temperature: 0℃~45℃
4, Relative Humidity: ≤85﹪
5. Response Time: ≤15S
6, operating voltage: AC220V
The oxygen content in automobile exhaust gas is analyzed to determine whether the emission of carbon monoxide (CO) and Hydrocarbon (HC) in automobile exhaust gas meets the requirements of national standards, and the oxygen content (﹪) of exhaust gas can also be used to reflect whether the air-fuel ratio of the engine is in the best power and economic state.
The instrument is specially designed for the automotive maintenance and repair Department, can meet the needs of emission gases, with compact structure, simple operation, easy to use and low price, etc., is the automotive maintenance, maintenance industry is the most ideal testing equipment.
Main technical parameters:
1, the scope of use:
Temperature: -20℃~55℃
Relative Humidity: 20%~80%
Environment: Indoor (or outdoor sun-avoiding and shelter from the rain)
2. Measuring range:
Luminescent Strength: 0~40000CD
Optical axis Skew Amount:
Vertical direction: Upper 1°20 ' ~ Lower 2°20 '
Horizontal direction: Left 2°20 ' ~ Right 2°20 '
3, the error of the display value:
Luminescent strength: ±10% (relative error) Optical axis offset: ±15 '
4, Headlight Center High measurement range: 0.5~1.25m
5, detection distance: 1m
6, Dimensions: (mm) (length * width * height)
Host: 850*600*60
Lifting bracket: 720*660*110
Ambient temperature: -5°C ~ °C
Relative Humidity: ≤90%
Power supply Voltage: Ac220v±10%,50±1hz
Measuring range:
A) luminescent strength: 0 ~ 120000cd
B) Optical axis offset:
Far Light: Vertical direction: Upper 350mm/10m ~ Lower 525mm/10m
Horizontal direction: Left 525mm/10m ~ Right 525mm/10m
Near Light: Vertical direction: Upper 350mm/10m ~ Lower 525mm/10m
Horizontal direction: Left 525mm/10m ~ Right 525mm/10m
Display Error:
A) luminescent strength: ±10%
B) Optical axis offset: ±35mm/10m
Our company produces brake testing station,Automotive Testing Equipment, Parking brake performance tester and other equipment, you are welcome to visit our company.
